Multifunction Tool BOSCH PMF190E

 The versatile all-rounder PMF 190 E sawing, cutting, sanding and scraping even in hard-to-reach areas

FEATURES

• Versatile due to a wide range of accessories
• A true all-rounder, especially when detailed work is required
• Toolholder with universal screw quick and easy changing of all accessories
• Bosch Electronic with continuously variable preselection of the oscillation rate for material-specific work
• Oscillation: 15,000 21,000 oscillations per minute at 2.8 angular degrees
• With 4-stage depth stop for limiting the depth of cut
• Cut, saw and sand
• Possibility to connect an all-purpose vacuum cleaner for dust-free sanding
• Ergonomic design compact and easy-to-handle tool with small grip circumference
• Comes complete with
• BIM segment saw blade for wood and metal, 85 mm
• Delta sanding sheet set, wood, 93 mm 
• Delta sanding plate 93 mm
• HCS plunge-cutting saw blade for wood, 32 x 40 mm
• Allen key
• 4-stage depth stop for segment saw blades

 SPECIFICATIONS

• Power input: 190 W
• No-load speed: 15.000 21.000 rpm
• Oscillation angle left/right: 1,4 °
• Weight: 1,2 kg
• Oscillation angle
• Bosch Electronic
• Softgrip
• Power: Corded

 Multifunction Tool BOSCH PMF190E

• The Bosch PMF 190 E all rounder has a wide range of applications from cutting and sawing wood, sanding plastic or metal to scraping and grout removal. Even in the tightest of corners and edges it can be used thanks to its ergonomic design and handy accessories.
• Compared to the previous version the PMF 190 E is easier to use due to the softgrip and reduced vibrations, the noise level has also been reduced. Bosch has optimized the ergonomics by reducing the size of the handle. The variable speed pre-selection allows you to match the working speed to the material with the 190 watt motor providing high power for all applications. The more you work with it, the more you will appreciate its abilities: its handiness, power, and manoeuvrability in tight spaces.
• Cutting in Soft Wood and Plastic: You can make a variety of useful cuts with the plunge cut saw blades for soft wood and plastic. With this handy saw blade you can make cut-outs, for example, in door frames or in furniture to access wall outlets.
• Cutting in tight spaces: Short or long cuts, in the middle or at the very edge, the PMF 10.8 LI and the BIM Segment Saw Blade with depressed center cuts areas that conventional machines only reach with extreme difficulty if at all. Parquet floors are cut flush in no time, protruding wood and new drainpipes will be cut to the right length quickly.
• Sanding Plate and sheets: Sand smooth surfaces on furniture, curves or even when working on bodywork. The high level of power, low vibration and the PMF’s light weight, you’ll find you can achieve impressive results without the need to apply a lot of pressure.
• Depth Stop: The depth stop ensures precise cutting depths. It can be easily attached at the clipping neck of the PMF 190 E on top of the segment saw blade series ACZ 85 and ACZ 100. As shown in the picture, depending on the adjustment of the depth stop, precise cuts in 4 steps between 8 mm and 14 mm with ACZ 85 blades and between 14 mm and 20 mm with ACZ 100 blades can be executed comfortably.
• Oscillation: the Secret to the All Rounder’s Success: The technical secret behind the versatility of the PMF 190 E is its oscillation principle: accessories do not have a circular motion, but rather oscillate at an angle of ±1.4 degrees - enabling most precise cutting, sanding and sawing.

All our products are cove